Audio Accessories
- Joby Wavo Mobile Windjammer Savage
- colorful fur cover can be easily attached by slipping it on
- impressive reduction of wind noise by a total of -35 dB
- colorful fur cover against popping noises when speaking
- suitable for the JOBY Wavo Mobile microphone
Joby Wavo Mobile Windjammer Savage
- Universal Adapter BY-K6
- suitable for DJI Osmo Pocket
- allows to connect microphones with a 3.5mm plug to your DJI Osmo Pocket
Boya 3.5mm Audio Adapter for DJI OSMO Pocket
- Wavo AIR mounting kit
- four additional attachments to complete the Wavo AIR kit
- simple system for locking and unlocking the accessories in seconds
- the accessory holder strip keeps your holders tidy
- contains a Velcro fastener, an accessory shoe ball joint, a universal 1/4 inch-20 screw adapter and
- Velcro washers
Joby Wavo AIR mounting kit
- SmallRig 1859 Universal Microphone Shock Mount Adapter
- isolates the microphone from vibrations and noise
- suitable for microphones with a diameter of 15-40 mm
- built-in accessory shoe mount
- 3/8 inch-16 threaded base
- suitable for Boompoles
SmallRig 1859 Universal Microphone Shock Mount Adapter
Free live consultation
Your individual consultation - from the comfort of your sofa
- compact cast metal plate stand
- Base diameter: 15 cm
- Extension: 28 - 40 cm
- incl. 2 cable clamps
- Weight: 1,2 kg
Rode DS-1 table top tripod
- Adapter from 3.5mm TRS jack to XLR plug
- Enables the use of 3.5mm TRS jack microphones on cameras and audio recorders with XLR jack
Deity V-LINK (XLR phantom power to 3.5mm TRS cable)
- SmallRig Shotgun microphone holder hot shoe 2352
- holds microphones with 19-25 mm diameter
- attaches to standard hot shoe adapters
- built-in soft silicone to absorb shock and noise
- compact and flat (70.9 mm height)
SmallRig 2352 Shotgun Microphone Holder with Hot Shoe
- DJI Pocket 2 micro tripod
- foldable, handy
- extremely compact and handy
- can be placed stably on many surfaces
- can be stored in the DJI Pocket 2 protective case
- Dimensions: 17.8 × 15.2 × 6.7 mm (folded)
- Dimensions: 117.6 × 117.6 × 25 (unfolded)
DJI Pocket 2 Micro Tripod
- Rode SC16 USB-C cable
- high quality protected patch cable
- Junction box for cable routing
- 300 mm (11.8 inch) long
- Output: USB-C
- Input: USB-C
- compatible with VideoMic NTG, NT-USB Mini, Wireless GO, RODECaster Pro, Al-1
Rode SC16 USB-C cable
- Rode MagClip Go magnetic holder
- Magnetic holder for Wireless GO, black
- Clip dimensions: 19.7 x 35.1 x 5.0 mm
- Weight clip: 5 g
- Magnet dimensions: 17.0 x 26.0 x 2.0 mm
- Weight clip: 9 g
Rode MagClip GO Magnetic clip for Wireless GO
- Professional studio boom arm
- suitable for radio, television, studio and home use
- offers a horizontal range of 820mm and a vertical range of 840mm
- Pivoting range of 360
Rode PSA-1 articulated arm stand
- Blackmagic Design URSA Mini Mic Mount
- shock- and vibration-insulating professional microphone mount
- Microphone holder is fitted with rubber rings
Blackmagic Design
- Walimex pro boom MicPipe hand stand f Micro 3m
- Sound boom for reports, interviews, set shootings and much more.
- Extension for easy improvement of sound recordings
- easy control and balance due to low weight
- Sponge rubber coating on the handle
- Cable routing directly through the tang
- Connection for microphones via 3/8 inch thread
- max. length 3 meters
- max. load capacity: 3 kg
Walimex per Tonangel MicPipe hand stand f micro 3m
- Angelbird SSD2GO PKT mounting bracket
- strong, secure bracket
- made of aluminum, robust and durable
- suitable for your portable SSD
Angelbird SSD2GO PKT Mounting Bracket
- Microphone pop shield with gooseneck and clamp
- Reduces explosive sounds during voice or vocal recordings
- Two-layer nylon screen with side air vents for efficient noise suppression
- Long gooseneck with clamp for flexible attachment and adjustment
- No logo on the fabric so that speakers/singers can concentrate on their task
- Dimensions (W × H × D): 152 mm × 514 mm × 177 mm
- Length of the gooseneck: 351 mm
Tascam TM-AG1
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Am Außenlager. Lieferzeit 4-6 Werktage nach Zahlungseingang
Der Artikel ist vor Ort in unserem Hauslager nicht vorrätig und wird nach erteiltem Kundenauftrag am Außenlager/beim Hersteller bzw. Disributor bestellt. Die zu erwartende Lieferzeit beträgt 4-6 Werktage.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.